User`s guide

3-9

Opening and Using the PowerDomain Control Utility

PowerDomain 2940UW/3940UW User’s Guide

Stock Number: 510864-00, Rev. B Page: 3-9

Print Spec Number: 493742-00

Current Date: 2/20/96 ECN Date: 2/27/96

PowerDomain 3940UW Termination

Termination is initially set to Automatic on the PowerDomain 3940UW

accelerator card. For each channel, if you are using only the internal

SCSI connector or only the external SCSI connector, you do not need to

change this setting.

In case your particular SCSI device does not respond appropriately

to the Automatic setting, refer to the following table to determine

which termination setting you should use:

Devices Connected to the

PowerDomain 3940UW

Termination

External (condensed 68-pin) connector only Enabled

Internal (68-pin) connector only Enabled

External (condensed 68-pin) and internal

(68-pin) connectors

Disabled