User`s guide

2-37
Installing the PowerDomain 2940UW/3940UW and Connecting SCSI Devices
PowerDomain 2940UW/3940UW User’s Guide
Stock Number: 510864-00, Rev. B Page: 2-37
Print Spec Number: 493742-00
Current Date: 2/20/96 ECN Date: 2/27/96
3 Tighten all six screws on the back panel.
4 Reconnect the power cords to all external SCSI devices and to
the computer.
5 Turn ON the power to all external devices, and then turn ON
the power to the computer.
After the accelerator card is installed, you can change its
configuration using the configuration control utility, which is
explained in Chapter 3, Opening and Using the PowerDomain Control
Utility.
Note: If you encounter any problems during installation,
see Chapter 4, Troubleshooting.