User`s guide

2-31
Installing the PowerDomain 2940UW/3940UW and Connecting SCSI Devices
PowerDomain 2940UW/3940UW User’s Guide
Stock Number: 510864-00, Rev. B Page: 2-31
Print Spec Number: 493742-00
Current Date: 2/20/96 ECN Date: 2/27/96
Note: Be sure to terminate the device at the end of
the SCSI chain. (Termination is explained in Setting
SCSI Chain Termination on page 2-48.) Be sure to
check the documentation included with your SCSI
device for any special installation instructions.
68-pin Internal Connector (PowerDomain 2940UW/3940UW)
To connect internal SCSI devices to the 68-pin internal connector(s)
of the PowerDomain 2940UW/3940UW
1 Connect the cable end referred to in step 1 on page 2-25 (for
tower models) or in step 3 on page 2-28 (for desktop models)
to a 68-pin internal accelerator card connector.
(PowerDomain 2940UW/3940UW connectors are designed
to plug in only one way.)
SCSI Device
To Accelerator Card
To First
SCSI Device