User`s guide

3-10

AHA-2940UW/OF and AHA-2944UW/OF User’s Guide

Using the SCSI Disk Utilities

To use the SCSI Disk Utilities option

Select SCSI Disk Utilities from the SCSISelect Options screen.

SCSISelect immediately scans the active device’s SCSI bus for

all devices connected to the single-chip host adapter. SCSISelect

displays a list of all SCSI IDs and the devices assigned to them.

Figure 3-4 shows an example of a SCSI Disk Utilities target

selection screen.

Figure 3-4. SCSI Disk Utilities Target Selection Screen

-------------[ SCSI Disk Utilities ]--------------

SCSI ID: 0 - No Device -

SCSI ID: 1 - No Device -

SCSI ID: 2 - No Device -

SCSI ID: 3 - No Device -

SCSI ID: 4 - Disk -CONNER CFP1060W

SCSI ID: 5 - No Device -

SCSI ID: 6 - No Device -

SCSI ID: 7 - Host Bus Adapter -AHA-294XU/UW/D

SCSI ID: 8 - No Device -

SCSI ID: 9 - No Device -

SCSI ID: 10 - No Device -

SCSI ID: 11 - No Device -

SCSI ID: 12 - No Device -

SCSI ID: 13 - No Device -

SCSI ID: 14 - No Device -

SCSI ID: 15 - No Device -

{<Space> to select device <Enter> to accept device <Esc> to exit}

Select Target: [SCSI ID: 0-No Device ]