User`s guide

3-2

AHA-2940UW/OF and AHA-2944UW/OF User’s Guide

To verify the selection, type the following command at the ok

prompt:

pwd

To view the configuration properties of any selected single-

chip host adapter, type the following command at the ok

prompt:

.properties

To obtain firmware release and copyright information, type the

following at the ok prompt:

release

Executing the SCSI

Select

Utility

At the ok prompt enter the following command:

scsiselect

The first screen is the SCSISelect Options screen which displays

options, one line at a time. Two options are available to you:

■

Configure/View Host Adapter Settings

■

SCSI Disk Utilities

To select an option, use the ↑ and ↓ keys or Spacebar to display

the option, then press Enter. To exit SCSISelect, press Esc.

A screen similar to the one in Figure 3-1 appears:

Figure 3-1. SCSI

Select

Options Screen

AHA-294XU/UW/D SCSISelect(R) Utility v1.06

------------------[ SCSISelect Options ]------------------

Do you wish to configure the host adapter or run the SCSI disk

{<Space> to select option <Enter> to accept option <Esc> to exit}

Select Option: [Configure/View Host Adapter Settings]

utilities?