Specifications

6. Remove the fan-sink assembly from the microprocessor:
a. Detach the fan-sink cable.
b. Loosen the two captive screws (in leaf-spring enclosures) on either side of
the fan-sink assembly, exerting pressure on the screwdriver.
c. With the two captive screws loosened, pivot the leaf-spring assemblies
outward and out of the notches on the fan-sink assembly.
d. Lift the fan-sink assembly up and out of the computer. It might be necessary
to gently twist the fan-sink assembly to loosen it from the microprocessor.
Important: Be careful when handling the adhesive material on the
microprocessor. If the adhesive material on the microprocessor
will be reused, do not contaminate it. If replacement adhesive
material is provided with the replacement part, be sure to
remove all traces of existing adhesive material from the
microprocessor before applying the new adhesive material.
FRU information (service only) 81