Adaptec 2930U2 - Storage Controller Ultra2 SCSI 80 MBps : Specifications : Page 85

FRU information (service only)

The field replaceable unit (FRU) procedures are intended for trained servicers who

are familiar with IBM products. See “Parts listing for IntelliStation M Pro Type 6220

and 6230 computer” on page 119 for information about CRUs and FRUs.

IntelliStation M Pro Type 6220 (desktop model)

The following section contains information about removing components of the

IntelliStation M Pro Type 6220 desktop model.

Baffle

Before you begin:

v Read “Safety information” on page 129.

v Read “Installation guidelines” on page 31.

v Review the information in “System reliability considerations” on page 31.

Complete

the following steps to remove the baffle:

1. Turn off the computer and attached devices; then, disconnect all external cables

and power cords.

2. Remove the cover and the frame-support bracket (see“Removing the cover” on

page 34).

Release tabs

3. Grasp the baffle on the top and bottom of the wide end and squeeze gently;

then, pull the baffle up and away from the back of the chassis.

4. When the baffle is free of the back of the chassis, lift it out of the computer.

To

reinstall the baffle, set the two pins on the bottom of the baffle into the slots

provided for them in the chassis; then, gently squeeze the baffle near the two tabs

on the top of the baffle so that the tabs slide into the two notches provided for

them.

IEEE 1394 adapter — Type 6220 (desktop model)

Before you begin:

v Read “Safety information” on page 129.