Specifications

Installing internal drives

Depending on your computer model, you might have one or more of the following

drives installed in your computer:

v Diskette

v Hard disk

v CD-ROM, CD-RW, or DVD/CD-RW combination drive

Internal drive bays

Your IntelliStation M Pro computer comes with an IDE CD-ROM or DVD/CD-RW

drive in bay 1, a 3.5-in., 1.44 MB diskette drive in bay 3, and a hard disk drive in

bay 6 or 7.

Bay 1

Bay 2

Bay 3

Bay 4

Bay 5

Bay 6

Bay 7

Notes:

1. Diskette drives, tape drives, CD-ROM, DVD/CD-RW, and DVD-ROM drives are

examples of removable-media drives. You can install removable-media drives in

bays 1, 2, 3, and 4 only.

2. You can install a 3.5-in. slim-high or 5.25-in. half-high removable-media drive,

such as a tape backup drive, in bay 2.

3. The IntelliStation M Pro computer supports only one diskette drive.

4. To install a 3.5-in. drive in a 5.25-in. bay, you must use the 5.25-in. conversion

kit, supplied with the option.

5. You have two serial ATA hard disk drive connectors on the system board.

6. You can mix and match parallel IDE and serial ATA IDE drives in bays 2, 4, 5, 6,

and 7.

7. The electromagnetic interference (EMI) integrity and cooling of the computer are

protected by having all bays and PCI slots covered or occupied. When you

install a drive or PCI adapter, save the EMC shield and filler panel from the bay

or the PCI adapter slot cover in the event you later remove the option.

8. For a complete list of supported options for your computer, go to

http://www.ibm.com/pc/ on the World Wide Web; then, select your country and

navigate to the list of options for your computer.

58 IBM IntelliStation M Pro Types 6220 and 6230: Hardware Maintenance Manual