Specifications

Error code/symptom FRU/action
662
(Diskette drive configuration error)
1. Run the Configuration/Setup Utility program and diagnostics.
2. Diskette drive.
3. Drive cable.
4. System board.
962
(Parallel port error)
1. Run the Configuration/Setup Utility program.
2. System board.
1162
(System board serial port 1 or 2 error)
1. Run the Configuration/Setup Utility program.
2. System board.
1762
(Hard drive configuration error, IDE only.)
1. Hard disk drive.
2. Hard disk cables.
3. Run the Configuration/Setup Utility program.
4. System board.
1962
(Drive does not contain a valid boot
sector)
1. Verify that a startable operating system is installed.
2. Run diagnostics.
3. Hard disk drive.
4. SCSI backplane.
5. Cable.
6. System board.
5962
(IDE CD-ROM drive configuration error)
1. Run the Configuration/Setup Utility program.
2. CD-ROM drive.
3. CD-ROM power cable.
4. IDE cable.
5. System board.
6. Battery.
8603
(Pointing-device error)
1. Pointing device
2. System board
00012000
(Machine check architecture error.)
1. Microprocessor
2. System board
00180700
(PCI device no responding.)
1. System board
2. PCI adapter
I9990650
(AC power has been restored)
1. Check cable.
2. Check for interruption of power.
3. Power cable.
Symptom-to-FRU index 111