Specifications

7. From the underside, grasp the bezel-release latch in the center, and gently pull
it back and away from the computer.
Top/side cover
Before you begin:
v Read “Safety information” on page 129.
v Read “Installation guidelines” on page 31.
v Review the information in “System reliability considerations” on page 31.
To
remove the top/side cover, complete the following steps:
1. Turn off the computer and all attached devices; then, disconnect all external
cables and power cords. See “Turning off the computer” on page 10.
2. Remove the side cover. See “Removing the side cover” on page 52.
3. Remove the front bezel. See “Removing the front bezel” on page 84.
4. Remove the handle assembly. See “Handle assembly” on page 97.
5. Remove the four screws from the back of the computer, and put them in a safe
place.
FRU information (service only) 95