Specifications

3. Remove the front bezel. See “Removing the front bezel” on page 84.
4. Remove the support bracket. See “Removing the side cover” on page 52.
5. Disconnect the cables.
6. Remove the adapters and both adapter retaining brackets (see “Installing an
adapter” on page 55).
7. Remove memory modules. See “Installing memory modules” on page 64.
8. Remove the microprocessor. See “Microprocessor/fan-sink assembly” on page
80.
9. Remove the extender-card adapters (see “Installing an adapter” on page 55).
10. To remove the rear computer foot, press the foot locking tab on the inside of
the computer, and lift the foot out of the chassis.
11. Remove the screws, and lift the system board and extender card out of the
computer.
FRU information (service only) 91