User`s guide

9
Connecting Internal SCSI Devices
7 Connect all other internal SCSI devices, as shown in the next
figure. (Do not terminate these SCSI devices.)
8 Connect a power cable from your computer’s power supply to
the power input connector on the SCSI device, as shown. Repeat
this step for each SCSI device.
9 If you are only installing internal SCSI devices:
■ Replace the computer cabinet.
■ Reconnect the power cables to the computer.
■ Install any software included with your SCSI device.
If you are also installing external SCSI devices, see Connecting
External SCSI Devices on page 10.
Terminated internal SCSI device
Unterminated internal SCSI device
Internal SCSI cable
Power input connector
Power supply
Power cable