User`s guide

5
Installing the PowerDomain 2930
3 Find an unused PCI expansion slot (typically white or ivory) in
the computer. Unscrew the expansion slot cover screw and
remove the slot cover to provide an opening, as shown.
4 Remove the PowerDomain 2930 card from its antistatic
packaging. Always handle the card by its edges.
5 Place the PowerDomain 2930 in the slot and press it down
firmly until the connector fingers are fully seated.
6 Secure the card bracket with the screw you removed in Step 3.
Expansion slot cover
PCI expansion slots
Bracket
Screw
Card bracket