Operating instructions

Marquette Hellige GmbH CardioSys / MicroLab V4.X Page 89
Servicing Instructions 227 436 37 Rev. B V1.3
10 Jumper tables
10.1 MOTHERBOARD INTEL SE440BX
Only for first startup and for some special configuration CONFIGURATION JUMPER
BLOCK J8A1 settings must be changed to fix CPU speed to 350MHz or to clear
passwords. See Appendix SE440BX Motherboard Product Guide Page.
10.2 Multi I/O Interface Card
AT bus, No PNP Card. The card must be configured as follows:
Type: ETC-9081-02
S1 COM3 IRQ10
S2 COM4 IRQ11
P1 278 IRQ5
P2 no jumpers / not used
IRQ10
IRQ11
IRQ5
COM3
COM4
278
P2 not used
no jumpers for
address & IRQ
ETC-9081-02