Operating instructions

Marquette Hellige GmbH CardioSys / MicroLab V4.X Page 68
Servicing Instructions 227 436 37 Rev. B V1.3
Replace the original printer driver with the “EPL-5500”
(Problem: no landscape printout possible under Windows 98
with original printer driver)
Symptom: Laser Printer prints numbers instead of grid
There are three solutions for this issue:
a) If you work within a network installation, make sure that CardioSoft is
installed on every client that want’s to work with this software.
b) Open Printer properties menue and change the printer scheduling to
„Print direct ..“
c) Do the following entries to the WIN.INI, section [CARDIO]:
GRA_DontRemoveGrid=1
Symptom: While printing a Resting ECG on an EPL5500 printer, the lettering
is printed over the sheet margins
Disable the „Advanced Printing Features“ under „Advanced Options“ in the
printer configuration menue.
Symptom: Thermal printer AR200 prints black bars
The thermal printer has a internal overload.
Activate the Stop Print button and start with printing again.
Symptom: Paper out message from a laser printer is displayed delayed
You can reduce the Transmission Retry Timeout. This will decrease the delay
of the displayed Paper out message, but it could case a timeout message
during print of pages with noisy ECG curves.
Reduce the Transmission Retry Timeout in Windows NT Printer Settings
(Tab "Port", button "Configure Port...".)
8.4 Error messages from CardioSys
Below is a list of error messages from CardioSys arranged numerically, modes or certain
functions having a specific number range. Many error messages are self-explanatory,
requiring no further explanation. Wherever considered prudent, possible error sources or
appropriate remedies are given.
8.4.1 Error messages [1xxx]: Patient management
[1108] Enter heights between 1 cm and 300 cm only
[1109] Enter heights between 1 in and 300 only
[1110] Enter weights between 0.1 kg und 400.0 kg only
[1111] Enter weights between 0.1 lb und 800.0 lb only
[1112] Patient ID or family name, first name and date of birth must be entered
[1113] Patient with this Patient ID already exists
[1114] Hard disk full