Operating instructions

Marquette Hellige GmbH CardioSys / MicroLab V4.X Page 67
Servicing Instructions 227 436 37 Rev. B V1.3
--------------------------------------------------------------------------------------------------
Question: The modem I use is not in the modem list and brings up an error
mesage at initialisation
Solution:
Chose modem type „User defined“ and delete „\X1“ out of the field „Initialisation“.
After doing this the error message will disappear.
Configure modems type „MultiTech“ only with 14400 baud and 19.2K baud.
Use the newer MultiTech 56K with the modified modem type „User defined“
--------------------------------------------------------------------------------------------------
Question: Patient selection menue will not fit within the screen
Solution:
Select „SMALL FONTS“ within the display configuration window.
--------------------------------------------------------------------------------------------------
Question: The buttons on the screen have a grey shadow when using CardioSoft
on a Windows 2000 based system (p.s. no CardioSys/Microlab issue)
Solution:
Select the scheme „Windows Classic“ under „Appearance“ in the display configuration
window
--------------------------------------------------------------------------------------------------
8.3 Printer debugging
Symptom: Printout incomplete
The printer probably has insufficient memory.
Symptom: EPSON EPL-5700 does not work at the Novell server
The speed of the parallel interface in the configuration of the Epson EPL-5700
must be set on LOW.
Symptom: AR200 does no formfeed
When using CardioSoft version > 2.5 the AR200 per default does no formfeed
before and after printing. You can override this by certain settings in the
AR200.INI if you always want a formfeed. When the user has a function
keyboard he can press the formfeed key to manually get a formfeed. If he has
no fiunction keyboard he can press the combination Shift-Ctrl-9 (Shift-Strg-
9) on the PC keyboard.
Symptom: NT 4.0, slowly printing with HP6P, HP2100M, HP4050M(only CardioSoft)
Please replace the original printer driver with “HP Laserlet 5M” from the
Windows NT Workstation CD ROM.
Symptom: Windows 98 (only CardioSoft) EPL-5700 do not work properly