Operating instructions
Marquette Hellige GmbH CardioSys / MicroLab V4.X Page 39
Servicing Instructions 227 436 37 Rev. B V1.3
5.2.10.4 Installation Instruction EPL5700
DEVICE NAME: EPSON EPL5700
DATE: 22.3.2000
PART NO.: 701 242 79
AUTHOR: Roland Banholzer / Wolfram Waltersberger
Only specially trained, technical staff is permitted to install the EPSON printer
EPL5700 in the patient environment and to put it into operation. The requirements of
IEC 601-1 must be observed. Furthermore, the manufacturer's safety information
and general ESD protection measures are to be observed during installation!
Have a look at the user's guide and carefully read the
safety information!
Unpack the printer and assemble the extra components as
described in the user's guide.
When operating the printer in conjunction with
CardioSys/MicroLab, please observe the instructions
describing the installation of the additional protective
earth conductor on pages 2 and 3 of this document!
Then you can connect the printer to the power line and switch it
on.