Operating instructions
Marquette Hellige GmbH CardioSys / MicroLab V4.X Page 36
Servicing Instructions 227 436 37 Rev. B V1.3
5.2.10.3 Installation Instruction HP6(M)P
DEVICE NAME: HP Laser Jet 6P
DATE: 22.3.2000
PART NO.: 701 276 01 / ..02 / ..03
SEITE/N: 1/3
AUTHOR: Roland Banholzer
Only specially trained, technical staff is permitted to install the printer HP LaserJet
6P in the patient environment and to put it into operation. The requirements of IEC
601-1 must be observed. Furthermore, the manufacturer's safety information and
general ESD protection measures are to be observed during installation!
Have a look at the user's guide and carefully read the
safety information!
Unpack the printer and assemble the extra components as
described in the user's guide.
When operating the printer in the patient environment
(1.5 m/5 ft.) in conjunction with CardioSys/MicroLab,
please observe the instructions describing the installation
of the potential equalization pin on pages 2 and 3 of this
document!