Operating instructions

Marquette Hellige GmbH CardioSys / MicroLab V4.X Page 35
Servicing Instructions 227 436 37 Rev. B V1.3
5.2.10.2 Install a Laser Printer
List of Printers and which Printer drivers you have to select and where you find the
printer driver if it is not installed:
Printer Minimum
Memory of
the printer
Printer driver where you find the printer driver
Epson EPL 5500 5 MB EPL-5600 Windows NT CDROM
Epson ELP 5600 5 MB EPL-5600 Windows NT CDROM
Epson ELP 5700 5 MB EPL-5700
Advanced
CardioSoft &
Windows98:
EPL-5500
Disk/CDROM delivered with the
printer
Windows98: use the EPL-5500
Printer Driver
HP 6P
HP2100
HP4050N
6 MB HP LaserJet
5M
Windows NT CDROM
HP4050N: Not to be used with
CardioSys
All Laser Printers
with HP4
Emulation!
6MB HP4 Windows NT CDROM
Recommended driver for all
printers
CardioSys / MicroLab: Printer drivers are installed in subdirectory:
C:\SUPPORT\....
Important Laser Printer Driver Settings:
1. Activate Tab "Port". Click on button "Configure Port". The "Timeout (seconds)
Transmission Retry" must be set to 90 seconds.
2. Activate Tab "Scheduling" and activate "Print directly to the printer".
3. Activate Tab "Device Settings" and set the "Installed Memory (Kilobyte)" to the value
of installed Memory in the printer.