Operating instructions

Marquette Hellige GmbH CardioSys / MicroLab V4.X Page 33
Servicing Instructions 227 436 37 Rev. B V1.3
Serial port B [Enabled]
Mode [Normal]
Base IO address: [2F8]
Interrupt: [IRQ 3]
Parallel port: [Enabled]
Mode: [Bi-directional]
Base IO address: [378]
Interrupt: [IRQ 7]
Advanced - IDE-Configuration
IDE-Controller: [Primary]
Advanced - Resource Configuration
IRQ 5: [Reserved]
IRQ 10: [Reserved]
IRQ 11: [Reserved]
Advanced – Power
Power Management : [Disabled]
Boot
Boot-time Diagnostic Screen [Enabled]
Quick boot Mode [Enabled]
Scan User Flash Area: [Disabled]
After Power failure: [Last State]
On Modem Ring: [Stay Off]