Operating instructions

Marquette Hellige GmbH CORINA Page 6

Version 2.0 227 437 01 D

1.4 Model 4 CORINA with Suction Pump and Analog Output

is a combination of Model 2 plus additional analog ECG output.

Casing design CORINA models 3 + 4:

1.5 Model 5 CORINA Standalone

The CORINA standalone is an ECG recorder constituting the analog connection between

the patient and the processing instrument. It operates without a PC (=> standalone) and

delivers the channel II signal (unedited signal, without filter and ADS, pacing pulse blanked

out) at the analog output. As in the standard CORINA it receives its power supply from a

separate plug-in power supply with the necessary operative voltage.

1.6 Model 6 CORINA Standalone with Suction Pump

This model is the same as Model 5 with an additional connection for the Electrode Applica-

tion System.

CORINA Standalone

1 Is on when the instrument is receiving

a power supply

2 Power cable and insulating casing

3 Connector for plug-in power supply

4 Connector for patient cable

5 Pump output for Electrode Application

System

6 ECG output 1 V

7 Interference suppression lead