Operating instructions

22 Matrox Graphics Card – Installation Guide
Matrox G100 series, Millennium II & Mystique 220
Technical features –
64-bit VGA-compatible drawing engine
Separate sync monitors only
Matrox PCI card only: Supports PCI bus version 2.1 at clock speeds up to 33 MHz
Matrox AGP card only: Supports AGP bus version 1.0 at 66 MHz
Video specifications –
The video follows the PS/2 standard, with no sync on RGB, and no blanking pedestal. Black
or blank – 0.0 V; White – 0.700 V.
There are five connections to a monitor that uses BNC (Bayonet Nut Connect) connectors –
R, G, B, HSYNC (white or gray wire), and VSYNC (black wire).
Environmental specifications –
Minimum/maximum ambient operating temperatures: 0 to 55º C
Minimum/maximum storage temperature: -40 to 75º C
Maximum altitude for operation: 3,000 meters
Maximum altitude for transport: 12,000 meters
Operating humidity: 20 to 80% relative humidity (non-condensing)
Storage humidity: 5 to 95% relative humidity (non-condensing)
Monitor connector pinouts
1 Analog red output
2 Analog green output
3 Analog blue output
4 Not connected
5–8 Ground
9 +5 V (DDC)
10 Ground
11 Not connected
12 SDA (DDC)
13 TTL horizontal sync
14 TTL vertical sync
15 SCL (DDC)
6
1115
15
10