Installation guide

16
SCSI Card 2906 User’s Reference
Starting SCSI
Select
Follow these steps to start SCSI
Select
:
1
Turn
ON
or restart your computer. Allow it to boot to a
DOS
prompt.
2
At the DOS prompt, insert the SCSI
Select
diskette and change
to the
a:\
prompt.
3
At the
a:\
prompt, type
2906cfg.exe
.
4
From the menu that appears, use the
↑
and
↓
keys to move the
cursor to the option you want to select, then press
Enter
.
Note:
If you have difficulty viewing the display, press
F5
to
toggle between color and monochrome modes. (This feature
may not work on all monitors.)
Exiting SCSI
Select
Follow these steps to exit SCSI
Select
:
1
Press
Esc
until a message prompts you to exit (if you changed
settings, you are prompted to save the changes before you exit).
2
At the prompt, select
Yes
to exit, then press any key to reboot
the computer. Any changes you made in SCSI
Select
take effect
after the computer boots.