Installation guide

7
3 Mount a new drive in a drive carrier and secure it with screws,
as shown in Step 1 on page 2.
4 Insert the drive carrier into the drive slot and push firmly but
gently until you can press the carrier handle down and click the
release button into place, as shown in Step 2 on page 2.
Technical Specifications
Occupancy Three 5.25" drive bays
Capacity Four (4) 1" Host Receptacle Connectors, SATA
hot-swap hard drives
Cooling
Subsystem
One 90 mm exhaust fan
System
Monitoring
■ Fan Fail Detection LED and Alarm
■ Overheat LED indication
Dimensions
(W x H x D)
147 mm x 129 mm x 230 mm
(5.8 in x 5.0 in x 9.1 in)
Weight Gross: 6.8 lb (3.4 kg)
2410SA Enclosure Kit HIG.fm Page 7 Thursday, October 23, 2003 1:20 PM