Product manual

23
Each of these cases requires a slightly different procedure. Most of the
details are handled automatically by the Adaptec installation utility for
Windows. You can indicate which options you want to use when
prompted by the install program. For more specific information on the
installation process, refer to the Installation Guide for your controller;
see the table on page 8.
Windows 2000
The following sections describe procedures for installing Adaptec
SCSI RAID controllers under Windows 2000. There are three
installation scenarios:
■
Upgrading Windows NT to Windows 2000
■
Adding SCSI RAID to an Existing Windows 2000 System
■
Installing Windows 2000 on a New System.
Note:
The Adaptec driver for Windows 2000 does not include
a digital signature. You may receive one or more warning
messages about this condition. Bypass the warnings, and
continue. The driver will function normally.