Product manual

22
SCO UNIX 3.2V4.2 and OpenServer 5
A SCO BTLD disk image is supplied on the Adaptec CD. You can create
floppy disks by using the Adaptec install utility which starts when the
CD is used as a boot media. You can install the driver under either SCO
UNIX 3.2V4.2 or OpenServer 5.
SCO UnixWare 7
An I
2
O OSM for UnixWare 7 is available from SCO. Contact SCO
Technical Support for additional information.
Microsoft Windows
Drivers for all Windows operating systems can be installed
automatically from the CD-ROM. In the case of a new system
installation, refer to the driver software installation procedures in the
Installation Guide for your controller.
The Adaptec driver for Windows provides support for both disk drives
and other devices, such as CD-ROMs and scanners.
There are several driver installation scenarios under Windows:
■
Installing a SCSI RAID controller into a new system, then
installing Windows
■
Upgrading an existing Windows system to a newer version
■
Adding a SCSI RAID controller to an existing Windows system