Product manual

10
Note:
Adaptec SCSI RAID controllers must have at least one
32MB memory module installed.
4
Install the controller and storage devices in the appropriate
enclosures. Attach all cables between the controller and the storage
devices.
5
Run Storage Manager on ROM (SMOR) by pressing Ctrl+A during
system boot. SMOR lets you configure the controller and verify
proper hardware configuration. You can also use SMOR to
configure your storage subsystem and disk arrays before installing
the operating system.
6
Install the I
2
O driver for your operating system. You can also install
Storage Manager Pro or Storage Manager on operating systems that
support these applications.
Storage Manager Pro and Storage Manager are included on the
Adaptec CD. If you are using a Microsoft Windows operating system,
they can be installed automatically by the Adaptec Autorun install
utility. A version of Storage Manager Pro for NetWare and versions of
Storage Manager for SCO UNIX and Linux are also included on the
installation CD-ROM. Refer to Installing Adaptec Storage Management
Software on page 32 for specific information.