Installation guide
A-7
Card and Module Diagrams
Part Description
ECCERR ECC Error LED (red)
IRQ, 8..1 Adapter activity LEDs
J1 Cache memory socket. (During operation, this socket
must contain a memory module.)
J5 Pins 1–2 NVRAM reset
Pins 3–4 Reserved—do not use
J6 Flash Mode 0
J10 Internal Wide Ultra160 SCSI connector for Channel A
J11
External Wide Ultra160 SCSI connector for Channels A & B
J12 Battery module connector
J14 Internal Wide Ultra160 SCSI connector for Channel B
J16
External Wide Ultra160 SCSI connector for Channels C & D
J18
Hard drive activity LED connector. (Pin 1 is nearest the
bracket.)
J19 Reserved—do not use
TPOWERA Termination power status LED
TPOWERB Termination power status LED
TPOWERC Adaptec 3410S only—Termination power status LED
TPOWERD Adaptec 3410S only—Termination power status LED
TERMEN_A Termination-enabled status LED
TERMEN_B Termination-enabled status LED
TERMEN_C Adaptec 3410S only—Termination-enabled status LED
TERMEN_D Adaptec 3410S only—Termination-enabled status LED