Installation guide

A-4

Adaptec RAID Installation Guide

Adaptec SCSI RAID 3200S

Part Description

ECCEN ECC enabled LED (green)

ECCERR ECC error LED (red)

IRQ, 8..1 Adapter activity LEDs

J1 Cache memory socket 1. (During operation, this socket

must contain a memory module.)

Cache memory socket 2. (Memory is optional for this socket.)

J7, J8 Reserved

J10 Internal Wide Ultra160 SCSI connector for Channel A

J11 External Wide Ultra160 SCSI connector for Channel A

J12 Battery module connector

J14 Internal Wide Ultra160 SCSI connector for Channel B

J15 External Wide Ultra160 SCSI connector for Channel B

P1 PCI connector

P3 Reserved

P9 Flash Mode 0

P4 Pins 1–2 NVRAM reset; Pins 3–4 Reserved—do not use

Device activity LED conn. (Pin 1 is nearest the top edge of the board.)

TRMEN-A/B

Termination enabled status LED

TRMENHD-A

Upper 8-bit termination status LED for Channel A

TRMPWR-A/B

Termination power status LED

J14J10

P6P4

J11

J15

P3 P9

J12

Audible

Alarm

TRMEN-B

IRQ

ECCERR

ECCEN

8 7 6 5 4 3 2 1

TRMENHD-A

TRMEN-A

TRMPWR-B

TRMPWR-A

PCI Connector