Installation guide

4-5
Installing Storage Management Software
Note: Storage Manager Pro does not run on JRE 1.2.2.
Therefore, if you have JRE 1.2.2 installed on your server, you
still need to install JRE 1.1.7B.
5 Edit the server’s sys:\system\autoexec.ncf file by typing startx
at the end of the file. This command initializes the graphics
console and the appropriate Java modules for Storage
Manager Pro.
To install Storage Manager Pro
1 Insert the Adaptec RAID Installation CD into your drive.
2 Mount the Adaptec RAID Installation CD as a NetWare volume
by typing cdmount adaptecraid_v1 /x=usr.
3 For NetWare 4.11, from the system console type
load adaptecraid_v1:\packages\netware\4.11\apps\SMPro\setup.nlm
For NetWare 4.2, from the system console type
load adaptecraid_v1:\packages\netware\4.2\apps\SMPro\setup.nlm
4 If Storage Manager Pro is not already installed, skip this step. If
Storage Manager Pro is already installed, you must uninstall
Storage Manager Pro before reinstalling it. To uninstall
a Shut down the ASMProServer service by typing asmpstop
from the system console.
b Select the Remove Above Product option to uninstall.
5 From the Select Product Option window, select Adaptec
Storage Manager Pro and press Enter. When the process is
complete, the files will be installed in
sys:\adaptec\smpro.
6 Press Enter to continue or F3 to specify a different path.
7 When you are asked to update the autoexec.ncf file, press Enter.
The appropriate NLM command lines and search path are
added to
autoexec.ncf so that the Storage Manager Pro Server
(ASMProServer) is started automatically when you reboot
your computer.