Installation guide

2-11
Installing Your Controller
3 If the boot device will be an array, create that array now. You
can create or modify array groups later.
4 Exit SMOR.
The system begins building arrays that you created or
modified. For large arrays, this process may take several hours.
You can perform other activities on the system while the build
operation continues. However, access time will be slower until
the build is complete.
If you are adding the controller to an existing system that already
has an operating system with Storage Manager Pro or Storage
Manager installed, you can monitor the progress of the build
operation. For additional information, refer to the Adaptec Storage
Manager Pro User’s Guide or the Adaptec Storage Management Software
User’s Guide.