User`s guide

Installing the Drivers

6 Click Yes to restart your computer.

Note: If you plug your AVC-2310 into a USB 1.1 port, this

message appears during driver installation:

A hi-speed USB device is plugged into a non-hi-speed USB hub.

This message indicates that your AVC-2310 will run at a

reduced (USB 1.1) speed. To ensure maximum performance,

plug your AVC-2310 into a USB 2.0 port. (For information on

USB 2.0 adapters and hubs, go to the Adaptec website at

www.adaptec.com.)

Note: To check if the driver is installed properly, follow the

instructions provided in Need Help Installing Your Device

Drivers? on page 48.

Now you’re ready to install the software. See page 21 to continue.