Instruction manual

Regular TV or Cable TV Without Set-top Box

(Dual-tuner)

For this setup, you will use the ports on the back of the Adaptec

AVC-3610. You will need:

■ Three RF coaxial cables

■ One USB cable

■ Cable splitter

Note: All required cables are included in the kit. See page 9 for

help identifying the cables.

To connect the Adaptec AVC-3610:

1 Connect the USB cable from the USB port on the Adaptec

AVC-3610 to a USB 2.0 port on your computer.

2 Use two RF coaxial cables to connect the TV1 and TV2 jacks on

the Adaptec AVC-3610 to the cable splitter.

3 Connect an RF coaxial cable from the cable splitter to your

wall jack or antenna.

4 Continue with Completing the Setup on page 25.

USB Cable

RF Coaxial Cables

RF Coaxial Cable

ack of AVC-3610