Instruction manual

13
Satellite or Cable TV With Set-top Box
(Single-tuner)
For this setup, you will use the ports on the back of the Adaptec
AVC-3610. You will need:
■ Two RF coaxial cables
■ One USB cable
■ IR blaster cable (optional — enables channel-changing)
Note: All required cables are included in the kit. See page 9 for
help identifying the cables.
To connect the Adaptec AVC-3610:
1 Connect the USB cable from the USB port on the AVC-3610 to a
USB 2.0 port on your computer.
USB Cable
RF Coaxial Cable
RF Coaxial Cable
IN
OUT
SET-TOP BOX
IR Blaster Cable
B
ack of AVC-3610