Instruction manual

Regular TV or Cable TV Without Set-top Box

(Single-tuner)

For this setup, you will use the ports on the back of the Adaptec

AVC-3610. You will need:

■ One RF coaxial cable

■ One USB cable

Note: All required cables are included in the kit. See page 9 for

help identifying the cables.

To connect the Adaptec AVC-3610:

1 Connect the USB cable from the USB port on the Adaptec

AVC-3610 to a USB 2.0 port on your computer.

2 Connect the RF coaxial cable from the TV1 j

ack on the

AVC-3610 to your TV wall jack or antenna.

3 Continue with Completing the Setup on page 25.

USB Cable

RF Coaxial Cable

ack of AVC-3610