Instruction manual

9
This Table describes the ports on the back of the Adaptec AVC-3610 .
The ports on the front of the Adaptec AVC-3610, marked Input 2, are
only used to connect the second TV source in dual-tuner setups
(see page 15). This Table describes these ports.
Port Description Cable Required
IR 2 Connects an IR blaster cable
to a second set-top box
IR blaster cable
IR 1 Connects an IR blaster cable
to a set-top box
IR blaster cable
Power Connects the Adaptec
AVC-3610 to a power source
AC adapter
USB Connects the Adaptec
AVC-3610 to your computer
USB cable
S-Video-in Connects S-Video from a
set-top box
S-Video cable
Video-in
(yellow)
Connects video from a
set-top box
Composite A/V cable
(yellow connector)
Audio-in
L (white)
Connects the left-channel
audio from a TV source
Composite A/V cable
(white connector)
Audio-in
R (red)
Connects the right-channel
audio from a TV source
Composite A/V cable
(red connector)
FM radio
tuner
Connects FM radio to your
computer
FM radio antenna
cable
TV1 Connects your TV source RF coaxial cable
TV2 Connects a second TV source
to your computer
RF coaxial cable
Port Description Cable Required
Audio-in
R (red)
Connects the right-channel
audio from a
second TV source
Composite A/V cable
(red connector)
Audio-in
L (white)
Connects the left-channel
audio from a
second TV source
Composite A/V cable
(white connector)
Video-in
(yellow)
Connects video from a
second set-top box
Composite A/V cable
(yellow connector)
S-Video-
in
Connects S-Video from a
second set-top box
S-Video cable