User`s guide

3-26
Adaptec Storage Management Software User’s Guide
The Advisory setting allows the controller to use its own
algorithms for cache management. This is more efficient than
allowing the operating system to direct the cache operation.
3 Click OK to exit the window and save the changes.
4 Reboot Windows to enable the new settings.
Note: If you reset the NVRAM on the controller, the changes to
your cache settings may not be retained. In that case, repeat
this procedure to ensure optimum performance.
Flash Configuration Window
When you click Flash in the Configure Host Bus Adapter window,
the Flash Configuration window, shown in Figure 3-10, is
displayed.
Note: It is easier to perform an update if the image files are
placed in the root directory of a disk. Each component must
be upgraded as a separate operation. Flash operations are not
supported over remote connections.
Figure 3-10 Flash Configuration Window
Combined RAID SW-UG.book Page 26 Monday, September 9, 2002 1:25 PM