User`s guide

3-24
Adaptec Storage Management Software User’s Guide
The following buttons are available:
Configure Host Bus Adapter Window
Click Configure in the Host Bus Adapter Info window to modify
hardware parameters for the RAID controller, The Configure Host
Bus Adapter window appears, as shown in Figure 3-9.
Figure 3-9 Configure Host Bus Adapter Window
Configure Examine and change HBA parameters, or download
new firmware code. For more information, see page
3-24.
Event Log Examine records of transfers to and from attached
devices. For more information, see page 3-32.
I/O Stats Examine records of cache and command transfers. For
more information, see page 3-45.
Print Print this window.
OK Accept changes and return to previous window.
Combined RAID SW-UG.book Page 24 Monday, September 9, 2002 1:25 PM