User`s guide

2-16
Adaptec Storage Management Software User’s Guide
Device Information Tab
Individual devices are listed in the Tree View under the controller
to which they are connected, as shown in Figures 2-7. Highlight a
device to view its information tab page.
Figure 2-7 Device Information Tab
The Device Information tab displays general information and
configuration. This view is divided into three parts: Description,
SCSI Capabilities and Status.
The Description section displays a general description of the
highlighted device, as follows:
Description Manufacturer name and model number as reported by
the device, followed by the icon for the device.
Revision Device firmware revision.
Address Device address in the form HBA x, Channel x, ID x, LUN
x. Display contains as much information as necessary to
unambiguously define the address of the device.
Capacity Device capacity in MB. For removable media, the
reported capacity is for the currently inserted media or no
media inserted if no media is inserted. Tape drives do not
report media.
Block Size Block size reported by device.
Combined RAID SW-UG.book Page 16 Monday, September 9, 2002 1:25 PM