User`s guide

2-10
Adaptec Storage Management Software User’s Guide
Information and Configuration Views
When you highlight an item within the Tree View, the
corresponding Information View is displayed.
Controller BIOS Settings
The controller displays the default Information View when SMOR
starts, as shown in Figure 2-3.
Figure 2-3 Configuration Window
The settings in this view affect the controller BIOS and all the
Adaptec controllers in your system. To view or change these
settings, highlight Configuration in the Tree View.
The following table illustrates the default settings to be found in
the windows shown in Figure 2-3.
Controller Options Default Available Settings
Enable SCSI CD-ROM Boot Disabled Enabled
INT13 Cache Setting Write Through Write Back
Scan Delay (seconds) Default 1, 10, 20, 30
SmartROM Options
EBDA Relocation Disabled Enabled
Enable Extended Int13 Enabled Disabled
Combined RAID SW-UG.book Page 10 Monday, September 9, 2002 1:25 PM