User`s guide

2-5
Storage Manager on ROM
File
RAID
Action
Help
Read System Config Rescan the system. Unsaved configuration
changes are lost.
Set System Config Save and enable configuration changes.
Exit Quit SMOR.
Create… Create a new array.
Delete Delete the currently selected array.
Rebuild Rebuild a RAID 1, 5, 10 or 50 array.
Stop Build Stop building or rebuilding an array.
Make Hotspare Designate the currently selected drive as a
hot spare.
Remove Hotspare Make the currently selected hot spare
available for use by the operating system.
Format Drive Low-level format a currently selected drive.
Note: Do not format a SCSI drive unless
formatting is recommended by the
manufacturer.
Flash HBA Update the firmware, controller BIOS, or
SMOR image in controller ROM.
Make Boot Floppy Make a bootable disk that runs SMOR.
About… Display version information for SMOR.
Combined RAID SW-UG.book Page 5 Monday, September 9, 2002 1:25 PM