User`s guide

A-7
SNMP
Installing Adaptec SNMP Support
The following topics describe how to install Adaptec SNMP
software and SNMP support for Windows.
Note: Ensure that your operating system has SNMP support
enabled before installing the Adaptec SNMP software.
The Adaptec SNMP software can be installed during the Adaptec
Storage Manager installation process. The Setup utility displays a
Select Components window that includes a check box for the
Adaptec SNMP software. By default, this box is not checked. To
install SNMP software, check the box labeled SNMP Agent.
Continue with the installation according to the installation
procedure for your operating system in the Adaptec SCSI RAID
Installation Guide.
Installing SNMP for Windows XP, Windows 2000 and
Windows NT
Refer to the Windows documentation for information about
installing the Windows SNMP service.
Installing the MIB
Before you can view information about your controller, you must
install the Adaptec MIB into the Management Console database.
During the installation of the SNMP feature, the Adaptec MIB is
installed by default in
\program files\storage manager\dptscsi.mib
Refer to your SNMP management console documentation for more
information about adding this MIB to your existing database.
The Adaptec SNMP subagent can be accessed from any SNMP
Management Console.
Combined RAID SW-UG.book Page 7 Monday, September 9, 2002 1:25 PM