User`s guide

A-5
SNMP
■ Device Inquiry data
■ Device capacity and block size
■ Device RAID level and status (Optimal, Failed, etc.)
■ Adaptec Array group contains all the RAID-specific
information within the Adaptec subsystem. Each array
includes:
■ Configuration parameters
■ SCSI address information
■ Background task information
■ Adaptec Statistics group contains statistical information
regarding the Adaptec controllers, devices, and arrays. Each
controller includes statistics on the following:
■ Cache pages
■ Commands
■ Transfers
For devices and arrays there are statistics on the following:
■ Cache hits/misses
■ Stripe boundary crossings
■ Physical I/O commands (read/write)
Adaptec Events group is used to send traps on controller event
log entries. These event log entries are converted to SNMP traps
and are identical to those used by the Adaptec broadcaster. The
specific traps are listed in the MIB.
Combined RAID SW-UG.book Page 5 Monday, September 9, 2002 1:25 PM