User`s guide

A-4
Adaptec Storage Management Software User’s Guide
■ Adaptec Controller group is a list of all Adaptec controllers in
the system. This group contains the following information for
each Controller:
■ Controller number
■ Controller vendor
■ Firmware version
■ Address
■ IRQ
■ IRQ type
■ Host bus type
■ Max transfer rate
■ Controller modules (RAID, expansion, caching, DIMMs)
■ Adaptec Bus group is a list of the buses with a set of parameters
which describe and control a bus. These parameters include:
■ SCSI bus number
■ SCSI bus width
■ SCSI bus type
■ SCSI bus transfer rate
■ Adaptec controller ID (on this bus)
■ Adaptec Device group is a list of devices managed by the
Adaptec subsystem and represents the physical configuration.
Each device in the system includes:
■ Device address information:
■ Controller
■ Bus
■ ID
■ LUN
Combined RAID SW-UG.book Page 4 Monday, September 9, 2002 1:25 PM