Installation guide

1-4
Adaptec SCSI RAID 2010S/2015S Installation Guide
■ Windows XP, Windows 2000, and Windows NT only—Array
expansion and extension during normal operation on RAID 0 or
RAID 5 arrays with the NTFS file system. Refer to the Adaptec
Storage Management Software User’s Guide for more information.
■ Legacy SCSI devices (including hard disk, tape, CD-ROM,
CD-RW, and Magneto-Optical drives) and jukeboxes.
■ SCSI Accessed Fault-Tolerant Enclosure (SAF-TE) and SCSI
Enclosure Services (SES) for high-availability Local Area
Network (LAN) servers and storage subsystems.
■ Adaptec RAID software supports up to 64 hard disk drives per
array and up to 2 Terabytes of storage capacity per array.
RAID features are summarized in the following table:
2010S 2015S
PCI bus type (bits/MHz)
64/66 64/66
Cache, standard (MB)
48 48
# of Channels
1
1
Usable channels and whether they are internal, external, or both
depends on motherboard design. No channels on controller.
00
# Devices per channel
2
2
ZCR controllers support Ultra320 and legacy hard disk drives
and non-hard-disk-drive devices, such as CD and tape drives.
15 15
Total # devices
30 30
# Connectors, internal
1
00
# Connectors, external
1
00
RAID 0, 1, 5, 10, 50, JBOD
Yes Yes
Hot spare
Yes Yes
Hot swap
Yes Yes
Connector type
PCI
3
3
Requires a special PCI slot designed to support the
motherboard’s RAIDIOS or EMRL logic connections.
SO-DIMM
4
4
Requires a special attachment slot (a PCI connected SO-DIMM)
to connect to the motherboard’s EMRL logic.
R2N2 RAID IG.BOOK Page 4 Monday, September 9, 2002 12:01 PM