Technical data

Product Retirement Notices
A.9 POLYCENTER Software Installation Utility: DECwindows Motif Interface Retired
A.9 POLYCENTER Software Installation Utility: DECwindows Motif
Interface Retired
V7.2
The DECwindows Motif interface for the POLYCENTER Software Installation
utility has been retired. All functions of the POLYCENTER Software Installation
utility are still available from the DCL interface using the PRODUCT command.
A.10 X.25 Client for OpenVMS Alpha Retirement (Alpha Only)
V7.3
The X.25 Client for OpenVMS Alpha product has been retired and is not
supported on OpenVMS Alpha Version 7.2 or 7.3. However, the X.25 for
OpenVMS Alpha product provides the functionality previously provided by the
X.25 Client for OpenVMS Alpha product.
Customers who need X.25 Client functionality for OpenVMS Alpha Version 7.3
can achieve it with the following:
• X.25 Version 1.5 for OpenVMS Alpha systems
• An X.25 Client or X.25 license
Note: You can use your X.25 Client license on the X.25 for OpenVMS Alpha
product to get the same functionality.
• DECnet-Plus Version 7.3 for OpenVMS
On OpenVMS VAX Version 7.3, X.25 functionality is included in DECnet-Plus for
OpenVMS and has not changed.
X.25 for OpenVMS Alpha Systems, Version 1.5 also includes:
• GAP Server support
• X.25 over TCP/IP (supporting the XOT protocol)
• X.25 tracepoints facility
• New PBXDD-XX synchronous card support
• Replacement for V1.3 and V1.4
A.11 Archived Manuals
V7.3
As products are retired and the operating system evolves, certain OpenVMS
manuals are archived. Archived manuals are no longer maintained and are not
part of the OpenVMS documentation set. However, they are available on the
OpenVMS Documentation CD–ROM and the external website:
http://www.compaq.com/openvms
A–4 Product Retirement Notices