User`s guide

11-2 A-63054 February 2004
To access the Program Properties dialog box:
1. From the Capture Software main menu, select File>Properties.
The Program Properties dialog box appears.
NOTES: Program properties can only be accesses by users with Administrator
privileges. By default, Capture Software is configured with two users
(SysAdmin and xxxxx), both of which have Administrator privileges.
At least one user must have Administrator privileges. Capture
Software does not allow User Profiles to be set up without at least
one user having Administrator privileges.
2. Set any of the desired values.
3. Click OK when finished.
User profiles Users and user groups can be configured in Capture Software to limit access
to specific applications and Capture Software functions (e.g., Application
Setup, Crop and Blank tools, etc.).
NOTE: User profiles are not available for Capture Software Lite for i50/i60/i80
Scanners or Capture Software Lite for i200 Series Scanners.
• Click on the User Profiles button to set up users and user groups.
A list of users appears.