User`s guide

9A-34 A-63054 February 2004
i800 Series Scanners
Mask tab
Mask coordinates define the area to be scanned. Each image (Front Bi-tonal,
Rear Bi-tonal, Front Color, Rear Color) can have its own unique scan area.
The Mask tab is only available when the Page Setup is defined for Fixed
Cropping (i.e., scanner auto-crop is disabled) or Zone processing. When Fixed
Cropping, the mask coordinates are measured relative to the top left corner of
the scanner transport. When Zone processing, the mask coordinates are
measured relative to the top left corner of the scanned document.
The Scan Mask can either be manually keyed in or defined using the
Draw function.
To define a Scan Mask manually:
1. Specify the Left value.
2. Specify the Top value.
3. Specify the Width value.
The maximum width value is 12 inches (coordinate value: 1200).
NOTE: The Left and Width fields combined cannot exceed the scanner’s
maximum width of 12 inches.
4. Specify the Height value.
The maximum height value is 30 in. (coordinate value: 3000). However,
when scanning at 400 dpi bitonal, the maximum height value is 26 in.
(coordinate value: 2600).