User`s guide

9A-8 A-63054 February 2004
Additional page
properties for
mid-volume scanners
For all Kodak mid-volume scanners (Series 3000/4000 Scanners) except for
the Scanner 3500, the following additional page properties are available:
Multi-feed thickness detection—select None, Warn, or Warn and Stop from
the drop-down list. When enabled, the scanner warns you with an audible
alarm whenever a scanned sheet of paper is detected to be thicker (commonly
caused by a multi-feed) than a single sheet. The detection is based on the
thickness of a scanned sheet of paper used in the Multi-feed Thickness
Calibration (accessed from the Scanner menu).
When Warn and Stop is selected, the scanner stops immediately when a multi-
feed is detected. You must open the scanner and remove the multi-feed sheets
before you can resume scanning.
High-speed scanning with same size documents—select this check box if
you are scanning batches that contain sheets that are all the same size. This
enables the scanner to scan at a faster rate of pages per minute. Specifically,
for example, scanner throughput increases from 75 pages per minute to 85
pages per minute for letter-size documents that are scanned in landscape
mode at 200 dpi (100 dpi for color).