User`s guide

A-63054 February 2004 4-63
Root Directory
The root directory contains the root output path to where batch output will be
transferred for the selected batch output format. By default, the root directory
is the path specified in the Output tab of Application Setup. To change the
root output path, specify a different path in the entry box and click on the
Apply button.
Configuring Selected Batch Output Formats
To configure a selected batch output format, highlight the batch output format
in the list box and click on the Setup button. This accesses the Setup dialog
for the selected batch output format.
The same batch output format can be selected more than once. This is useful
in situations where you want the batch to be output to two different locations
using the same output format. However, the setup of the batch output format
(specified in the Setup dialog) must be the same for all instances in the
Selected Output Format list.
Including Batch Statistics
By default, a batch index file containing statistical information about the
scanned and processed batch will be saved in the path specified in the Output
tab of Application Setup. If you want the batch index file to be output to the root
directory for each selected output format, enable the Include Batch Statistics
File option. When this option is enabled, the Filename can be made up of one
or more batch index fields. In addition, you can specify the File extension of the
batch statistics file. By default, the batch statistics file is named <Batch
Name>.DAT.